Buying Hitachi 728028 3/8-Inch Diamond Core Bit

I use these bits regularly to drill glass ranging from 1/8 to 3/4 inches and averaging 3/8ths inch thick. I can drill more than 250 holes with a single bit when run in a cold water bath on a drill press. They rarely clog, are self cleaning, create an accurate hole and start well on irregular surfaces. They are manufactured from heavy duty materials. They are stout. I have tried about five other brands of various designs. This Hitachi design is simply the best.Get more detail about Hitachi 728028 3/8-Inch Diamond Core Bit.

Buy Hitachi N5008AC 1-Inch to 2-Inch 7/16-Inch Medium Crown 16 Gauge Stapler

I am a bit concerned about the operation at start-up. It takes a dozen or so staples to get it to working correctly. It will not set the staple until you waste a dozen or so to "warm up" the gun.Get more detail about Hitachi N5008AC 1-Inch to 2-Inch 7/16-Inch Medium Crown 16 Gauge Stapler.

Purchase Hitachi H45MRY 12 Lb SDS Max Demolition Hammer with UVP

I am putting in a 25 foot long pondless waterfall with a 4 foot grade drop. It calls for a 5' x 4' x 2' basin to catch, store and recirculate the water back to the weir at the top. It also calls for cutting "steps" in the hillside for each waterfall along the stream. What the plans don't account for is that all this digging has to take place in the most compacted, hard and rubbery clay soil imaginable.

So far, I had used a Mantis tiller, a pick ax, a tool that is heavy and is designed to cut edges or shape sides of deep holes that I can't recall the name of along with shovels and a 5 gallon bucket and a garden cart. At last count, I had removed 11 inches of depth and I was exhausted.

I started thinking about renting a jack hammer. Around here, those go for $70.00 per day. In addition to the water feature project, I also have several retaining walls and a flagstone patio along with electrical and water lines to dig and bury so $75 times 4-5 days started getting me to thinking about buying something.

I looked at everything, but I saw nothing. That is to say that nobody carries demolition hammers in stock. Maybe it's the economy and stores have to watch what they carry, especially when it comes to construction/demolition tools when nobody is building. In any case, this purchase boiled down to academic research.

After altogether too much time spent comparing apples to oranges and granny smiths to golden delicious, I decided to focus on the tasks at hand and it appeared that something in the range of 9-10 ft lbs of energy and 10-15 lbs of weight would strike a balance for what would suit my needs. That seemed to mean something in the $500 or so range.

In the course of full disclosure, I had a 5 year consulting contract with Hitachi (hard drive folks). My impression of the company as responsible and good corporate neighbors is pretty high. They are environmentally responsible and operated with high integrity in my dealings with the company. In addition, I bought a Hitachi chop saw some years back and still find it a great tool to use. Now that I think about it, I also have a Hitachi 1/2" corded drill that was built like a tank.

Still, I had a singular doubt about the Hitachi demo hammer and that was ironically about one of the features that attracted me to the H45MRY.

One of the selling points for this product is that they have developed a shock isolation system that they tout as being easy on the mechanism as well as easy on the user. All sounded pretty good. But, I have always believed that it was hard to "negate" energy in a tool without taking away from the overall performance of the tool. Whether it was in the form of using energy to counter shock or fitting an isolation system that removed the user from shock as well as direct contact necessary to use the tool with precision, I have always had my doubts about the overall usefulness of "comfort" features on serious tools.

That all changed with the Hitachi demo hammer. With the clay spade I ordered along with the tool, I went out today and doubled my previous efforts clay removal from my streams water chamber in less that 30 minutes (as opposed to several hours and way too many tools.

This tool is powerful enough for any landscaping digging I will have to do in my all but undiggable clay property. In addition, I feel no residual effect from using the tool. I have used other demo hammers with little or no shock systems and felt tingly for some time later. Not at all with this tool.

While I am sure that the Makitas, Boschs Dewalts and other makes of the same performance class are competent performers, I can say that choosing this model has left me highly satisfied. I will get a ton of use out of this tool and I like that fact that I can put it down and feel no after effects.

Very highly recommended. Get more detail about Hitachi H45MRY 12 Lb SDS Max Demolition Hammer with UVP.

Order Hitachi NR90GR Round Head 2-inch to 3-1/2-inch Cordless Gas Framing Nailer

This is essential for sites without power when you can't use a gas powered compressor, or when hose management presents too much of a problem, but when conditions aren't right it can really be frustrating. I've only fired about 10,000 nails through it, but I bought it used and it still works fine. I'm surprised how fast I can lay down decking with this, It doesn't have a bump mode but it's about the same speed as an air nailer powered by a 120 volt compressor running nonstop.

It can get finicky below 35 degrees or above 80. The worst thing is it's much harder to press down than an air nailer, at long reaches a hammer is easier. In cold temps, this only gets worse and sometimes it doesn't fire so you waste a lot of effort. However, this limitations aside, it can be used to complete entire projects.Get more detail about Hitachi NR90GR Round Head 2-inch to 3-1/2-inch Cordless Gas Framing Nailer.

Where To Buy Hitachi G12SE2 4-1/2-Inch Disk Grinder

I've used every brand, and none hold up to the abuse that this grinder handles. They are only $89.99 @ Lowes, and the cases are more plastic junk that ends up in land fill. If you need a case, buy a canvas tool bag, they waste less space, and can hold more acessories.Get more detail about Hitachi G12SE2 4-1/2-Inch Disk Grinder.

Shop For Hitachi P20SBK 3.4 Amp 3-1/4-Inch Planer

I'd have to give it 4.5 stars, it's worth more than 4 stars so I had to give it 5.

Good, solid tool. Simple, clean and throws chips clear easily. Plenty of power for most jobs, handles hardwoods well with reasonable bite.

Con, no dust collection port or bag. Just ejects the chips out the side shoot. In the shop it's no big deal, if I have guests coming over and I want them to think I've been working hard, I'll run it over a board for a few minutes and it looks like I've been working for hours. In the house, you better get someone to catch. On the plus side, the chips are shavings, not saw dust so it's easy to clean up.

Not that it's hard to figure the thing out but the instructions are all but useless. I'd rate them about 50% if you count the safety warnings. No mention of how to use the edge guide and usage suggestions basically consist of an illustration of a board with the cutting already done. Blade change instructions are a bit lacking as well.

If you need a power planer handy you can use, you can't go wrong with this one.

Get more detail about Hitachi P20SBK 3.4 Amp 3-1/4-Inch Planer.

Hitachi C10RA3 15 amp 10-inch Benchtop Table Saw with Stand

This is a very good job site saw. Its features allow 3/4 inch plywood cuts and about anything else. It needs a better blade from the start but that's my only suggestion. Plenty of power and works better than several more expensive models I've used.Get more detail about Hitachi C10RA3 15 amp 10-inch Benchtop Table Saw with Stand.