Quality blade made in France. Should be standard with Hitachi 12" miter saws but unfortunately mine came with a 32 tooth piece of garbage. Actually came missing teeth as well. Hitachi took care of the problem to my satisfaction though. This blade seems to be pretty quiet and cross-cuts very well. Pretty smooth cuts but not as narrow as the original blade even though it is a narrow kerf blade. So far no complaints.Get more detail about Hitachi 726100 12-Inch 60 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor.
Showing posts with label Cheap. Show all posts
Showing posts with label Cheap. Show all posts
Sunday, February 21, 2010
Hitachi 726100 12-Inch 60 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor Buy Now
Quality blade made in France. Should be standard with Hitachi 12" miter saws but unfortunately mine came with a 32 tooth piece of garbage. Actually came missing teeth as well. Hitachi took care of the problem to my satisfaction though. This blade seems to be pretty quiet and cross-cuts very well. Pretty smooth cuts but not as narrow as the original blade even though it is a narrow kerf blade. So far no complaints.Get more detail about Hitachi 726100 12-Inch 60 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor.
Tuesday, February 2, 2010
Order Hitachi NR90GR Round Head 2-inch to 3-1/2-inch Cordless Gas Framing Nailer
This is essential for sites without power when you can't use a gas powered compressor, or when hose management presents too much of a problem, but when conditions aren't right it can really be frustrating. I've only fired about 10,000 nails through it, but I bought it used and it still works fine. I'm surprised how fast I can lay down decking with this, It doesn't have a bump mode but it's about the same speed as an air nailer powered by a 120 volt compressor running nonstop.
It can get finicky below 35 degrees or above 80. The worst thing is it's much harder to press down than an air nailer, at long reaches a hammer is easier. In cold temps, this only gets worse and sometimes it doesn't fire so you waste a lot of effort. However, this limitations aside, it can be used to complete entire projects.Get more detail about Hitachi NR90GR Round Head 2-inch to 3-1/2-inch Cordless Gas Framing Nailer.
Thursday, January 7, 2010
Hitachi KC18DCL 18-Volt Lithium Ion Impact Driver and Hammer Drill Combo Kit Best Quality
I have to drill in concrete everyday.. I read the reviews of this set of Hitachi drill/driver, most prices I found were about 600 for both.. Being that I got the items for about $260 via amazon was appealing. But I didn't know how it would hold up in my work. I read even more reviews and then purchased. The strength and reliability are far greater then mentioned. I've dropped them from 2 stories, been in the rain with them (Here in SC it was more like a major down poor). Ran them as hard as I can. My dewalt had failed by now, but this set.. Not even close to failure. I still keep my dewalt as backup, but I'm very impressed with this set of drill and driver.Get more detail about Hitachi KC18DCL 18-Volt Lithium Ion Impact Driver and Hammer Drill Combo Kit.
Thursday, December 31, 2009
Hitachi 726101 12-Inch 90-tooth ATB Crosscutting Saw Blade with 1-Inch Arbor This instant
I purchased this blade to do some finish work on a re-model of a home. It leaves nice clean cuts and I have no complaints.Get more detail about Hitachi 726101 12-Inch 90-tooth ATB Crosscutting Saw Blade with 1-Inch Arbor.
Subscribe to:
Posts (Atom)